Bikes or Goodies Wanted

If you're looking for Cub & Terrier bikes, parts, OR (??) what you want goes here.

Please see How To Place An Ad

Did you know you can pay sellers on-line?

Bikes Wanted

Parts/Goodies Needed

1963-64 Cub Cub sports fender
1958 T20J Tiger Cub Chain Guard
'60's or later Heavy Forks
T20 Road Cub Center Stand
63-67 Cub Exhaust Pipe T20S
  Chain Guard - T20
1964 Cub for Trials Misc Wanted
  Fork Tubes - Misc
  1959 T20S Parts
  Alloy fork spacers
  Tiger Cub Plunger Frame

Bikes Wanted

Wanted: 1963-64 Cub suitable to build a trials Cub for vintage competition, not show. Will consider anything from seperate frame and engine up to ridable trials machine. Will pay according to condition with a current maximum around $1500.00. I will even consider parts that suit my project.
Contact: Martin Kotz in New Hampshire or (603) 298-9015

I am seriously searching for a restoreable 1958 T20J Tiger Cub. Jim Roberts in IL (847) 394-2478

I would like the latest model they made or during the 60's.I'm not sure when they quit making them. The later years had roller bearings on the crankshaft. The early ones had brass bushings and they were bad about throwing rods. They also made a "scrambler" version with the upswept pipe.I would consider one of those. In 1963 I had a 1957 Cub.I pushed it more than I rode it.I later sold it for $175.I wish I had it back. Thanks. Larry Miller.Prattville,Al.

Wanted, original paint, mechanically correct or documented restored Triumph T20 road Cub, preferably 60's vintage.  Cash waiting for the right machine. Please include pix and state condition and asking price with your email response. Shipping not a problem. Thanks. Lloyd Buck, Memphis, Tennessee.

I want to buy a complete Triumph Cub up to 1964 for conversion to a trials bike. I am willing to pay up to 800 pounds (United Kingdom) for a complete running bike. A road bike for conversion would be OK as would a basket case. I have a DOT trials (1959) and a Bullet Trials (1955) and just MAY be willing to trade. I live in Skelmersdale, Lancashire, England but can travel anywhere in the UK. Many thanks - Tom Pratt

Parts/Goodies Wanted

I'm trying to put together a road version of a 64 cub for my wife Sandy. I have most of what I need but am missing the chain guard. Malcolm Wooff (603) 898 5914

Cub sports rear fender (18" wheel) and chain guard for sports model. Gord Browne

Set of heavy forks and headlight ears. Gord

Exhaust Pipe, (E3883), for '59 T20S. Bill Richardson

Chainguard and horn for the T20 Road Cub(small wheel cub). A correct pair of handlebars in good shape also. night ph. (601) 752-2951 or e-mail me. Thanks, Allan

WANTED 56 CUB PLUNGER CHAIN GUARD !ANY SHEET METAL FOR 53/56 PLUNGER CUBs /TERRIERS ,FENDER BRACEs ,FENDERs ,BAT. BOXs or COVER ,etc. what do you have? I have later model parts to trade or will cash buy. ELEY 404 633 4104


Wanted: Cub Magneto that fits into the primary case. Bendix, Tri-Cor. etc. Alan Haggard 309-962-2426 or email

I would like some help locating the following list of items for my 1959 t20s restoration project. Correct alloy front fender and stays. Correct steel rear fender. Handle bar. Skid plate and mounting hardware. I have a center stand to trade to fit similar model. Jerry Etzel, I'm in Atlanta, GA.

Want - Alloy fork spacers and washers (Part nos H 1866 & H1867). Fit 1964 on heavyweight forks (T20SM/SC etc).  Will pay any reasonable price plus postage to Australia.  Contact Tim Partington on e-mail

Wanted: Lower fork tubes or entire forks, head, and passenger foot pegs for 1967 Tiger Cub. I am located in Montana, phone 406-259-1658. E-mail

Want to buy: Tiger Cub plunger frame. Ray Corlew Gallatin, Tenn. 1-615-452-5820 nights 1-615-451-1288 days

Wanted: 1963-67 Tiger Cub SS, SH, SC, SR, M, TS20, TR20 trials. (not particular, just want a cub,) Will consider a project bike or a runner. Contact: Don Hart in Plaquemine, Louisiana (225) 687-3435